M6 Threaded Nickel Copper NTC 10K Ohm Beta 3950K Probe Assembly
Unit: mm
NTC thermistor is potted in the hex head threaded nickel plated copper case.
- NTC thermistor R25: 10KΩ±1%,Beta value B(25/50): 3950K
- Nickel plated copper case, M6×1.0+S8×18.5mm
- O-ring: 5×8×1.5mm
- Potting and Sealing Epoxy Resin, black color.
- Screw nut: Stainless steel, 304, M6×1.0
- Wire Cable UL2651 26AWG 300V 105℃, black.
For temperature sensing measurement of liquid, water, air, etc. Ideal for vessel and pipe installation. Typical application water heater boilers, and other industrial equipment machine appliance.
Resistance at 25C R25: 10K ohm+/-1%,
Beta Value B(25/50): 3950K+/-1%
Dissipation Factor: 5 mw/℃ min.
Thermal Time Constant (in water): 12 seconds max.
Insulation resistance: 500VDC, 100 MΩ
Voltage withstanding: 1200VAC, 1mA, 2 seconds
Operating temperature range: -30 to +105C
Temperature measurement accuracy from -30 to +105C shall be within +/- 1.5C.
Temperature Centigrade |
Resistance (KΩ) |
Temperature Centigrade |
Resistance (KΩ) |
Temperature Centigrade |
Resistance (KΩ) |
---|---|---|---|---|---|
-40C | 301.239 KΩ | 15C | 15.665 KΩ | 70C | 1.748 KΩ |
-35C | 218.766 KΩ | 20C | 12.480 KΩ | 75C | 1.482 KΩ |
-30C | 160.978 KΩ | 25C | 10.000 KΩ | 80C | 1.252 KΩ |
-25C | 120.082 KΩ | 30C | 8.075 KΩ | 85C | 1.066 KΩ |
-20C | 90.619 KΩ | 35C | 6.538 KΩ | 90C | 0.912 KΩ |
-15C | 68.760 KΩ | 40C | 5.338 KΩ | 95C | 0.781 KΩ |
-10C | 52.724 KΩ | 45C | 4.373 KΩ | 100C | 0.675 KΩ |
-5C | 40.834 KΩ | 50C | 3.596 KΩ | 105C | 0.583 KΩ |
0C | 31.898 KΩ | 55C | 2.977 KΩ | 110C | 0.504 KΩ |
5C | 25.074 KΩ | 60C | 2.477 KΩ | 115C | 0.440 KΩ |
10C | 19.739 KΩ | 65C | 2.078 KΩ | 120C | 0.386 KΩ |
Test Item | Test Condition | Performance Request |
---|---|---|
Lead Wire Tensile Pulling | Applying force 9.8N(1KGF)along lead wire direction, for 1 minute. | No cracks in the resin and wire bonding, No visible damage |
Falling down | Falling down from 1 meter high to 10mm thick oak wooden board, 5 times. | No cracks in the resin and wire bonding, No visible damage |
Test Item | Standard | Test Conditions | ΔR25/R25 (typical) | Remarks |
---|---|---|---|---|
Low temperature storage | IEC 60068-2-1 | Storage at low category temperature. Temperature: -30 oC Time: 1000 hours | ≤3% | No visible damage |
Storage in dry heat | IEC 60068-2-2 | Storage at upper category temperature. Temperature: 100 oC Time: 1000 hours | ≤3% | No visible damage |
Storage in damp heat, steady state (Humidity test) | IEC 60068-2-3 | Temperature: 40oC, Humidity:90%-95% RH, Duration:1000 hours |
≤3% | No visible damage |
Rapid temperature cycling | IEC 60068-2-14 | 1. -30C/30 minutes 2. 30C/5minutes 3. 100C/30 minutes 4. 30C/5minutes. Number of cycles: 5 Cycles |
≤3% | No visible damage |
Other Related AMWEI NTC thermistors Products for Temperature Sensing
Content Headline
Technical Knowledge
NTC Thermistor Glossary and Definition
How NTC thermistor beta value is calculated?
NTC Thermistor Manufacturing Process and Quality Control
Applications Articles
NTC thermistor for temperature measurement and control selecting reference information.
Charging Control with AMWEI NTC Thermistor
How to Select Packaged Thermistor Temperature Sensor Probe Assembly ? 6 Steps