Murata Code PTGL18AR6R0H8B72B0 POSISTOR Alternative, PTC Thermistor for Circuit Overload Protection 6 Ohm 265V 3.1A

AMWEI Ordering Code: AMZ11-16P6RH265

Appearance and Dimension

Current Protection PTC Thermistor Outlook Engineering Drawing

Leaded Disk Coated PTC Thermistor Appearance  Engineering Drawing

  • Silicon resin coated ceramic disk, green color
  • Coated ceramic disk outer diameter D : 17.5mm max.
  • Coated ceramic disk thickness T: 5.5mm max.
  • 2 Tinned lead wire space F: 5.0± 1mm
  •  Pin wire diameter d: 0.6mm
  • Pin wire length L: 25mm min.
  • Ceramic body to kinked wire length H: 24mm max.

Features

  1. Application: Overcurrent protection, Overload, Short circuit protection.
  2. Best suited to meet the requirements for power supplies motor transformer protection.
  3. Error-free operations are assured by rush current.
  4. Circuit is protected until current is turned off.
  5. Restores the original low resistance value automatically once the overload is removed.
  6. Non-contact design leads to long life and no noise.
  7. Durable and strong against mechanical vibration and shock.

Electrical Specifications

  • Resistance @25C  R25 :6Ω +/-  25%
  • Rated voltage (RMS) : 230 V
  • Maximum operating voltage Vmax:  265 V
  • Maximum withstanding voltage Vwith: 350 V
  • Maximum permissible repetitive turn over current Imax: 3.1A
  • Hold Current, Non-trip Current, at +25℃ : 390 mA
  • Hold Current, Non-trip Current, at +60℃:  300 mA
  • PTC Thermistor Trip Current, Operating Current at +25℃ It : 780 mA
  • Curie temperature (Switch temperature) : 120C
  • Operating ambient temperature range (V=0): -40~+125C
  • Operating ambient temperature range (V=Vmax) :  0~60C

Reliability Data

Test Item Standard Test conditions |ΔR25/R25|
Electrical endurance,
cycling		 IEC 60738-1 Room temperature, 3.1A; 265V
Number of cycles: 100		 <25%
Electrical endurance,
constant		 IEC 60738-1 storage at Voltage: 230V
Ambient temperature: +60C
Test duration: 1000 h		 <25%
Damp heat IEC 60738-1 Temperature of air: 40℃,
Relative humidity of air: 93%,
Duration: 56 days
Test according to IEC  60068-2-78		 <10%
Lead wire tensile IEC60068-2-21 Test Ua: pull strength 10N, 10 seconds,
Test Ub: bending 90°, pull strength 5N,
successively twice.
Test Uc: revolving 180°,
successively twice.		 <20%
Rapid change
of temperature		 IEC 60738-1 T1 = Top,min (0 V), T2 = Top,max (0 V)
Number of cycles: 5
Test duration: 30 min
Test according to IEC 60068-2-14, test Na		 <10%
Climatic sequence IEC 60738-1 Dry heat: T = Top,max (0 V)
Test duration: 16 h
Damp heat first cycle
Cold: T = Top,min (0 V)
Test duration: 2 h
Damp heat 5 cycles
Tests performed according to
IEC 60068-2-30		 <10%

Packaging Information

Loose bulk, or Production tape package.

Technical Knowledge

What is PTC Thermistor Current Protector Resettable Fuse

PTC Fuse Current Protection Application

How PTC Thermistor Current Protection Work？ Operating Principle

PTC Thermistor Replacement Idea for a Resistor and Fuse solution

PTC 3 types over-current and overload protection

PTC thermistor circuit protection diagram examples

Transformer Protection 265V, 100C Data
(For PTC fuse installed inside transformer windings coil)

Transformer Protection 265V 120C Data
(For PTC fuse installed outside transformer windings coil)

PTC thermistor Current Protector Reliability Data

How to select PTC thermistor circuit protector for overcurrent and overload protection?

An example selecting AMWEI PTC thermistor for transformer overload protection.