Radial Leaded Epoxy Resin Coated NTC Thermistor Temperature Sensor, 100K ohm, Beta B(25/50):4200K, Temperature -40C to +125C.
Unit: mm
Temperature sensing, control and compensation. E.g. inlet air temperature sensing thermistors or ECT in
automotive applications, sensor elements in industrial and commercial applications, heating systems and industrial
systems, medical equipment.
- Resistance at 25C R25: 100K ohm+/-2%
- Beta Value B(25/50):4200K+/-1%
- Optional R25 resistance tolerance, ±1%(F), ±2%(G), ±3%(H), or ±5%(J)
- Dissipation Factor: δ≥3mW/℃.
- Thermal Time Constant (in still air): ≤12 seconds.
- Rated Powerwatt (below 25C): ≤50mW
- Insulation resistance: room temperature, 500V, 60 Seconds, ≥100MΩ.
- Operating temperature range: -40 to +125C.
| Temperature Centigrade |
Resistance (K Ohm) |
Temperature Centigrade |
Resistance (K Ohm) |
Temperature Centigrade |
Resistance (K Ohm) |
|---|---|---|---|---|---|
| -40C | 3866.649 KΩ | 20C | 126.714 KΩ | 80C | 10.749KΩ |
| -35C | 2738.029 KΩ | 25C | 100.000 KΩ | 85C | 9.035 KΩ |
| -30C | 1967.590 KΩ | 30C | 79.626 KΩ | 90C | 7.628KΩ |
| -25C | 1433.007 KΩ | 35C | 63.703 KΩ | 95C | 6.466 KΩ |
| -20C | 1056.430 KΩ | 40C | 51.219 KΩ | 100C | 5.502 KΩ |
| -15C | 787.430 KΩ | 45C | 41.394 KΩ | 105C | 4.700 KΩ |
| -10C | 592.792 KΩ | 50C | 33.628 KΩ | 110C | 4.029KΩ |
| -5C | 450.291 KΩ | 55C | 27.462 KΩ | 115C | 3.465 KΩ |
| 0C | 344.828 KΩ | 60C | 22.542 KΩ | 120C | 2.990 KΩ |
| 5C | 266.003 KΩ | 65C | 18.597 KΩ | 125C | 2.588 KΩ |
| 10C | 206.553 KΩ | 70C | 15.418 KΩ | ||
| 15C | 161.348 KΩ | 75C | 12.844 KΩ |
| Test | Standard | Test Conditions and methods | Requirements |
|---|---|---|---|
| Soldering & Solderability | IEC60068-2-20 Test Ta |
Temperature: 230±5 ℃， 2-2.5mm away from ceramic body On: 2±0.5 Seconds. |
The terminations shall be evenly tinned |
| Resistant to soldering heat | IEC60068-2-20 Test Tb |
Temperature: 260±5℃, 2-2.5mm away from ceramic body On：10±1 Seconds. |
No visible damage, ΔR25/R25≤3% |
| Lead wire tensile | IEC60068-2-21 Test U |
Test Ua: Force 10N, On 10 Seconds; Test Ub: Bending 90C, Force 5N, Twice. |
No break off, ΔR25/R25≤3% |
| Test | Standard | Test Conditions | ΔR25/R25 (typical) | Remarks |
|---|---|---|---|---|
| Low temperature storage | IEC 60068-2-1 | Storage at low category temperature. Temperature: -40 oC Time: 1000hours | ≤3% | No visible damage |
| Storage in dry heat | IEC 60068-2-2 | Storage at upper category temperature. Temperature: 100 oC Time: 1000hours | ≤3% | No visible damage |
| Storage in damp heat, steady state (Humidity test) | IEC 60068-2-3 | Temperature: 40oC, Humidity:90%-95% RH, Duration:1000 hours |
≤3% | No visible damage |
| Rapid temperature cycling | IEC 60068-2-14 | 1. -40C/30 minutes 2. 30C/5minutes 3. 100C/30 minutes 4. 30C/5minutes. Number of cycles: 5 Cycles |
≤3% | No visible damage |
Other Related AMWEI NTC thermistors Products for Temperature Sensing
Content Headline
Appearance & Dimension
NTC 100KΩ B4200 Application
NTC 100KΩ B4200 Electric Data
Resistance vs. Temperature RT Data
NTC 100KΩ B4200 Mechanical Test
NTC 100KΩ B4200 Reliability Data
NTC 100KΩ B4200 Application
NTC 100KΩ B4200 Electric Data
Resistance vs. Temperature RT Data
NTC 100KΩ B4200 Mechanical Test
NTC 100KΩ B4200 Reliability Data
Technical Knowledge
NTC Thermistor Glossary and Definition
How NTC thermistor beta value is calculated?
NTC Thermistor Manufacturing Process and Quality Control
Applications Articles
NTC thermistor for temperature measurement and control selecting reference information.
Charging Control with AMWEI NTC Thermistor
Reliable limiting of current surges by AMWEI NTC and PTC thermistor
How to Select NTC Thermistor for Inrush Current Limiting?
How to Select Packaged Thermistor Temperature Sensor Probe Assembly ? 6 Steps
