Radial Leaded Epoxy Resin Coated NTC Thermistor Temperature Sensor, 10K ohm, Beta 3435K, Operting Temperature -40C to +125C.
Unit: mm
Temperature sensing, control and compensation. E.g. inlet air temperature sensing thermistors or ECT in
automotive applications, sensor elements in industrial and commercial applications, heating systems and industrial
systems, medical equipment.
- Resistance at 25C R25: 10K ohm+/-1%
- Beta Value B(25/85): 3435K+/-1%
- Optional R25 resistance tolerance, ±1%(F), ±2%(G), ±3%(H), or ±5%(J)
- Dissipation Factor: δ≥3mW/℃.
- Thermal Time Constant (in still air): ≤12 seconds.
- Rated Powerwatt (below 25C): ≤50mW
- Insulation resistance: room temperature, 500V, 60 Seconds, ≥100MΩ.
- Operating temperature range: -40 to +125C.
| Temperature Centigrade |
Resistance (K Ohm) |
Temperature Centigrade |
Resistance (K Ohm) |
Temperature Centigrade |
Resistance (K Ohm) |
|---|---|---|---|---|---|
| -40C | 203.9050 KΩ | 20C | 12.0786 KΩ | 80C | 1.6677 KΩ |
| -35C | 153.2681 KΩ | 25C | 10.0000 KΩ | 85C | 1.4513 KΩ |
| -30C | 116.7740 KΩ | 30C | 8.3055 KΩ | 90C | 1.2660 KΩ |
| -25C | 89.9530 KΩ | 35C | 6.9336 KΩ | 95C | 1.1080 KΩ |
| -20C | 69.9363 KΩ | 40C | 5.8168 KΩ | 100C | 0.9727 KΩ |
| -15C | 54.8150 KΩ | 45C | 4.9029 KΩ | 105C | 0.8566 KΩ |
| -10C | 43.2795 KΩ | 50C | 4.1515 KΩ | 110C | 0.7566 KΩ |
| -5C | 34.4082 KΩ | 55C | 3.5306 KΩ | 115C | 0.6702 KΩ |
| 0C | 27.5385 KΩ | 60C | 3.0152 KΩ | 120C | 0.5953 KΩ |
| 5C | 22.1865 KΩ | 65C | 2.5855 KΩ | 125C | 0.5302 KΩ |
| 10C | 17.9937 KΩ | 70C | 2.2257 KΩ | ||
| 15C | 14.6919 KΩ | 75C | 1.9231 KΩ |
| Test | Standard | Test Conditions and methods | Requirements |
|---|---|---|---|
| Soldering & Solderability | IEC60068-2-20 Test Ta |
Temperature: 230±5 ℃， 2-2.5mm away from ceramic body On: 2±0.5 Seconds. |
The terminations shall be evenly tinned |
| Resistant to soldering heat | IEC60068-2-20 Test Tb |
Temperature: 260±5℃, 2-2.5mm away from ceramic body On：10±1 Seconds. |
No visible damage, ΔR25/R25≤3% |
| Lead wire tensile | IEC60068-2-21 Test U |
Test Ua: Force 10N, On 10 Seconds; Test Ub: Bending 90C, Force 5N, Twice. |
No break off, ΔR25/R25≤3% |
| Test | Standard | Test Conditions | ΔR25/R25 (typical) | Remarks |
|---|---|---|---|---|
| Low temperature storage | IEC 60068-2-1 | Storage at low category temperature. Temperature: -40 oC Time: 1000hours | ≤3% | No visible damage |
| Storage in dry heat | IEC 60068-2-2 | Storage at upper category temperature. Temperature: 100 oC Time: 1000hours | ≤3% | No visible damage |
| Storage in damp heat, steady state (Humidity test) | IEC 60068-2-3 | Temperature: 40oC, Humidity:90%-95% RH, Duration:1000 hours |
≤3% | No visible damage |
| Rapid temperature cycling | IEC 60068-2-14 | 1. -40C/30 minutes 2. 30C/5minutes 3. 100C/30 minutes 4. 30C/5minutes. Number of cycles: 5 Cycles |
≤3% | No visible damage |
Other Related AMWEI NTC thermistors Products for Temperature Sensing
Content Headline
Appearance & Dimension
NTC 10KΩ B3435 Application
NTC 10KΩ B3435 Electric Data
Resistance vs. Temperature RT Data
NTC 10KΩ B3435 Mechanical Test
NTC 10KΩ B3435 Reliability Data
NTC 10KΩ B3435 Application
NTC 10KΩ B3435 Electric Data
Resistance vs. Temperature RT Data
NTC 10KΩ B3435 Mechanical Test
NTC 10KΩ B3435 Reliability Data
Technical Knowledge
NTC Thermistor Glossary and Definition
How NTC thermistor beta value is calculated?
NTC Thermistor Manufacturing Process and Quality Control
Applications Articles
NTC thermistor for temperature measurement and control selecting reference information.
Charging Control with AMWEI NTC Thermistor
Reliable limiting of current surges by AMWEI NTC and PTC thermistor
How to Select NTC Thermistor for Inrush Current Limiting?
How to Select Packaged Thermistor Temperature Sensor Probe Assembly ? 6 Steps
