Radial Leaded Epoxy Resin Coated NTC Thermistor Temperature Sensor, 5K ohm, Beta B(25/50): 3950K, Temperature -40C to +125C.
Unit: mm
Temperature sensing, control and compensation. E.g. inlet air temperature sensing thermistors or ECT in
automotive applications, sensor elements in industrial and commercial applications, heating systems and industrial
systems, medical equipment.
- Resistance at 25C R25: 5000 ohm+/-2%
- Beta Value B(25/50): 3950K+/-1%
- Optional R25 resistance tolerance, ±1%(F), ±2%(G), ±3%(H), or ±5%(J)
- Dissipation Factor: δ≥3mW/℃.
- Thermal Time Constant (in still air): ≤12 seconds.
- Rated Powerwatt (below 25C): ≤50mW
- Insulation resistance: room temperature, 500V, 60 Seconds, ≥100MΩ.
- Operating temperature range: -40 to +125C.
| Temperature Centigrade |
Resistance (K Ohm) |
Temperature Centigrade |
Resistance (K Ohm) |
Temperature Centigrade |
Resistance (K Ohm) |
|---|---|---|---|---|---|
| -40C | 148.330 KΩ | 20C | 6.243 KΩ | 80C | 0.622 KΩ |
| -35C | 109.057 KΩ | 25C | 5.000 KΩ | 85C | 0.531 KΩ |
| -30C | 81.682 KΩ | 30C | 4.037 KΩ | 90C | 0.455 KΩ |
| -25C | 61.873 KΩ | 35C | 3.272 KΩ | 95C | 0.392 KΩ |
| -20C | 47.184 KΩ | 40C | 2.665 KΩ | 100C | 0.339 KΩ |
| -15C | 36.132 KΩ | 45C | 2.181 KΩ | 105C | 0.294 KΩ |
| -10C | 27.752KΩ | 50C | 1.794 KΩ | 110C | 0.256 KΩ |
| -5C | 21.376 KΩ | 55C | 1.484 KΩ | 115C | 0.224 KΩ |
| 0C | 16.521KΩ | 60C | 1.234 KΩ | 120C | 0.197 KΩ |
| 5C | 12.825KΩ | 65C | 1.032 KΩ | 125C | 0.173 KΩ |
| 10C | 10.012 KΩ | 70C | 0.867 KΩ | ||
| 15C | 7.872 KΩ | 75C | 0.733 KΩ |
| Test | Standard | Test Conditions and methods | Requirements |
|---|---|---|---|
| Soldering & Solderability | IEC60068-2-20 Test Ta |
Temperature: 230±5 ℃， 2-2.5mm away from ceramic body On: 2±0.5 Seconds. |
The terminations shall be evenly tinned |
| Resistant to soldering heat | IEC60068-2-20 Test Tb |
Temperature: 260±5℃, 2-2.5mm away from ceramic body On：10±1 Seconds. |
No visible damage, ΔR25/R25≤3% |
| Lead wire tensile | IEC60068-2-21 Test U |
Test Ua: Force 10N, On 10 Seconds; Test Ub: Bending 90C, Force 5N, Twice. |
No break off, ΔR25/R25≤3% |
| Test | Standard | Test Conditions | ΔR25/R25 (typical) | Remarks |
|---|---|---|---|---|
| Low temperature storage | IEC 60068-2-1 | Storage at low category temperature. Temperature: -40 oC Time: 1000hours | ≤3% | No visible damage |
| Storage in dry heat | IEC 60068-2-2 | Storage at upper category temperature. Temperature: 100 oC Time: 1000hours | ≤3% | No visible damage |
| Storage in damp heat, steady state (Humidity test) | IEC 60068-2-3 | Temperature: 40oC, Humidity:90%-95% RH, Duration:1000 hours |
≤3% | No visible damage |
| Rapid temperature cycling | IEC 60068-2-14 | 1. -40C/30 minutes 2. 30C/5minutes 3. 100C/30 minutes 4. 30C/5minutes. Number of cycles: 5 Cycles |
≤3% | No visible damage |
Other Related AMWEI NTC thermistors Products for Temperature Sensing
Content Headline
Appearance & Dimension
NTC 5KΩ B3950 Application
NTC 5KΩ B3950 Electric Data
Resistance vs. Temperature RT Data
NTC 5KΩ B3950 Mechanical Test
NTC 5KΩ B3950 Reliability Data
NTC 5KΩ B3950 Application
NTC 5KΩ B3950 Electric Data
Resistance vs. Temperature RT Data
NTC 5KΩ B3950 Mechanical Test
NTC 5KΩ B3950 Reliability Data
Technical Knowledge
NTC Thermistor Glossary and Definition
How NTC thermistor beta value is calculated?
NTC Thermistor Manufacturing Process and Quality Control
Applications Articles
NTC thermistor for temperature measurement and control selecting reference information.
Charging Control with AMWEI NTC Thermistor
Reliable limiting of current surges by AMWEI NTC and PTC thermistor
How to Select NTC Thermistor for Inrush Current Limiting?
How to Select Packaged Thermistor Temperature Sensor Probe Assembly ? 6 Steps
