Amphenol Thermometrics YQC120N0010 Cross, PTC Thermistor Resettable Fuses for Overcurrent Overload Temperature Protection, Radial Leaded Disc Silicon Resin Coated 10Ω 140V 120C 1.2A

AMWEI Ordering Code: AMZ12-10P10RH140

Leaded Disk Coated PTC Thermistor Appearance Engineering Drawing

Application: Overcurrent protection, Overload, Short circuit protection.
Best suited to meet the requirements for power supplies motor transformer protection.
Error-free operations are assured by rush current.
Circuit is protected until current is turned off.
Restores the original low resistance value automatically once the overload is removed.
Non-contact design leads to long life and no noise.
Durable and strong against mechanical vibration and shock.

Test Item	Standard	Test conditions	\|ΔR25/R25\|
Electrical endurance, cycling	IEC 60738-1	Room temperature, 1.2A; 140V Number of cycles: 100	<25%
Electrical endurance, constant	IEC 60738-1	storage at Voltage: 110V Ambient temperature: +60C Test duration: 1000 h	<25%
Damp heat	IEC 60738-1	Temperature of air: 40℃, Relative humidity of air: 93%, Duration: 56 days Test according to IEC 60068-2-78	<10%
Lead wire tensile	IEC60068-2-21	Test Ua: pull strength 10N, 10 seconds, Test Ub: bending 90°, pull strength 5N, successively twice. Test Uc: revolving 180°, successively twice.	<20%
Rapid change of temperature	IEC 60738-1	T1 = Top,min (0 V), T2 = Top,max (0 V) Number of cycles: 5 Test duration: 30 min Test according to IEC 60068-2-14, test Na	<10%
Climatic sequence	IEC 60738-1	Dry heat: T = Top,max (0 V) Test duration: 16 h Damp heat first cycle Cold: T = Top,min (0 V) Test duration: 2 h Damp heat 5 cycles Tests performed according to IEC 60068-2-30	<10%